CE-Certification ODM Electric Breast Pump Factory Exporters – D-188 High Quality Portable Manual Breast Pump with Silicone Pipe – Dearevery

Preparations

Please confirm that all components of the breast milk pump have been thoroughly sterilized and assembled correctly according to the instructions. First apply hot compress onto your breast with a wet and hot towel and massage it. After massage, sit straight and slightly forward (don’t lie on your side). Align the center of your pump’s silicon breast pad to your nipple and attach it to your breast closely. Make sure there is no air inside for normal suction.

Before you start assembling a breast milk pump, please wash your hands and be sure to sterilize all components prior to use!

1. Insert the anti-backflow valve into the tee and install it on the bottom

2. Tighten the bottle counterclockwise

3. Insert the cylinder bracket into the cylinder and press the cylinder into the tee

4. Press the handle into the tee. Note that the convex point of the cylinder bracket and the concave point of the handle need to be installed in place

5 Install the silicone breast pad on the trumpet of the tee and make sure that it fits the trumpet

How to Use

Hold the breast milk pump assembly with your left hand. Press and hold the handle with your right hand for about 3 seconds and then release it. Stay for 2 seconds. You can also make appropriate adjustments as required (But note not to press and hold it too long, which may cause too much milk or backflow of milk).